Reply
Insignia Support
Posts: 626
Registered: ‎02-25-2009

I am receiving the error message “No Signal” on my TV.

I am receiving the error message “No Signal” on my TV.

 

• Try changing the input on your TV by pressing the input/source/video/etc. button on your TV’s remote.

Insignia Support
Posts: 626
Registered: ‎02-25-2009

My Blu-ray DVD player is running really slowly.

My Blu-ray DVD player is running really slowly.

 

• It is normal for the player to take 30-60 seconds to boot up and load a disc. Please remember that this player is computer based and therefore needs to boot up just like a computer does.

Insignia Support
Posts: 626
Registered: ‎02-25-2009

My volume is not working. I hear no sound.

My volume is not working. I hear no sound.

• Make sure the TV volume is not muted.
• Check volume levels.
• Make sure your connections are connected correctly to the jacks on the player and TV.
• The audio cables you are using may be bad, try a new set.
• If you are using an HDMI connection make sure your HDMI Audio Out is not muted.

1. Press SETUP.
2. Press ▲ or ▼ to select Quick Menu, then press ENTER. The Quick menu opens.
3. Press ▲ or ▼ to select HDMI Audio Out, then press ENTER. The HDMI Audio Out menu opens.
4. Press ▲ or ▼ to select HDMI Multi (Normal), then press ENTER.
5. Press SETUP to close the menu.

Highlighted
Insignia Support
Posts: 626
Registered: ‎02-25-2009

How do I setup my Blu-ray DVD player to play surround sound?

How do I setup my Blu-ray DVD player to play surround sound?

• Make sure your player and TV are turned off.
• What type of audio system are you connecting?

Digital Audio Coaxial System

1. Connect one end of a digital audio coaxial cable to the DIGITAL OUT (PCM/BITSTREAM) COAXIAL jack on the back of your player.
2. Connect the other end of the cable to the DIGITAL AUDIO COAXIAL INPUT jack on the digital audio system.

Digital Audio Optical System

1. Connect one end of a digital audio coaxial cable to the DIGITAL OUT (PCM/BITSTREAM) OPTICAL jack on the back of your player.
2. Connect the other end of the cable to the DIGITAL AUDIO OPTICAL INPUT jack on the digital audio system.


HDMI Receiver

1. Connect one end of an HDMI cable to the HDMI OUT jack on the back of your player.
2. Connect the other end of the cable to the HDMI IN jack on the receiver.
3. Connect an HDMI cable to the HDMI OUT jack on the receiver
4. Connect the other end of the cable to the HDMI IN jack on the TV.

Note: Please refer to your TV manual to determine if your TV has options for surround sound. You may be able to make further changes to the surround sound via the Audio menu on your TV.