Reply
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 10: Why doesn’t my soundbar have power?

  • Press the power button on your remote control or on the top of the soundbar.
  • Make sure that the AC adapter is securely plugged into the power outlet and the soundbar.
  • Plug a different device into the power outlet being used to ensure that it is working properly.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 11: Why doesn’t the soundbar come on when the TV is turned on?

  • The soundbar must be turned on manually. 
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 12: Why doesn’t the soundbar turn off when the TV is turned off?

  • The soundbar must be turned on manually. 
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 13: My soundbar is not working properly.

  • Unplug the AC adapter from the wall outlet and then try plugging it in again after 30 seconds.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 14: Why is the remote control not working?

  • Point the remote control at the remote control sensor on the soundbar.
  • Remove any obstacles in the path between the remote control and the system.
  • Replace the battery in the remote control.
  • Move closer to the soundbar. The remote control reach is approximately 23 ft.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 15: How do I install or replace the battery in my remote control?

  1. Open the battery cover latch on the remote control.
  2. Remove the old battery and insert the new 3V lithium battery (CR2025) into the battery tray. Be sure to match the polarity of the battery with the plus sign (+) in the battery tray.
  3. Slide the battery tray back into the battery compartment until it clicks into place.

install_battery.jpg

Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 16: When does the standby LED light?

  • The red standby LED lights when the soundbar is in standby mode.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 17: When does the power LED light?

  • The power LED lights green when the soundbar is turned on.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 18: What does the sound mode LED indicate?

  • The sound mode LED indicates the Digital Signal Processor (DSP) sound mode selected.
    • Standard – Lets you enjoy normal sound.
    • Theater – Best for enjoying movies. Bass frequencies are enhanced.
    • News – Select for clear voice reproduction.
Moderator
Posts: 1,093
Registered: ‎02-03-2009

Question 19: When does the BASS LED light?

  • The green BASS LED lights when the BASS frequency enhancement is activated.
  • The green BASS frequency enhancement is deactivated when the BASS LED is not lit.