Reply
Visitor
mudsteam
Posts: 8
Registered: ‎08-28-2011

Re: IS-HTIB102

It is a Panasonic PT-61DLX75 Rear projection TV



Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: IS-HTIB102

Hello Mudsteam,

 

I was unable to find a code for your receiver, however the remote for the Panasonic TV does have a code search feature, so I would suggest trying it. You can use the code search feature by following these steps:

 

  1. Turn off your receiver.
  2. Press and hold the "OK" and "Power" buttons on the Panasonic remote for 5 seconds, then release.
  3. Press the "RCVR" button on the remote.
  4. Press "Volume +" then press "Power", repeat this until the receiver turns on.
  5. Press "OK" to save the code.

If you use the code search feature and do not find a code to allow the devices to communicate with one another, then they are most likely not compatible.

Regards,
Zac
Insignia™ Support
Newbie
salsanvazquez
Posts: 5
Registered: ‎09-15-2011

Re: Remote Control Codes for Home Audio

what is the code for NS-R2001, im using a ur5u 8780l time warner cable remote, thanks

Visitor
remotecodehel
Posts: 2
Registered: ‎09-15-2011

Re: Remote Control Codes for Home Audio

Hello,

 

I'm looking for a remote code for the NS-R2001. I have a comcast DVR remote, gray with red ok button.

 

Help!!

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Salsanvazquez,

 

I would suggest trying the codes 024, 102, 106, 370, 447, 589. If those codes do not work, I would suggest using the code search feature of the remote by following these steps:

 

  1. Turn on the NS-R2001.
  2. Press and hold the "Aux" and "OK/Sel" button for at least 3 seconds, the LED will turn a solid color indicating that it is in programming mode.
  3. Press and hold the "Channel +" button until the receiver turns off, then release the button.
  4. Press the "Aux" button again to save the code, the LED will blink twice indicating that the code has been saved.
Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Remotecodehel,

 

I would suggest using the code search feature of the remote by following these steps:

 

  1. Turn on the receiver.
  2. Press the "Aux" button on the remote.
  3. Press and hold the "Setup" button until the Aux button blinks twice on the remote, then release.
  4. Press 9 9 1 3, the Aux button will again blink twice.
  5. Press the "Power" button on the remote then repeatedly press the "Channel +" button until the receiver turns off.
  6. Press "Setup" to save the code to the remote.

 

Regards,
Zac
Insignia™ Support
Newbie
vahalla7
Posts: 1
Registered: ‎09-24-2011

Re: Remote Control Codes for Home Audio

I am looking for any and all KENWOOD remote codes that *might* work with my Insignia receiver. I have an older Kenwood device (mini disc player) and am hoping there is a code that will work with it....realize its a long shot!

Visitor
Drulynch
Posts: 4
Registered: ‎09-24-2011

Bose Cinemate

Does anyone have the Insignia rc 800m programming code for a Bose cinemate system?
Newbie
salsanvazquez
Posts: 5
Registered: ‎09-15-2011

Re: Remote Control Codes for Home Audio

None of those suggestions worked for me
Insignia Support
John-INSG
Posts: 4,703
Registered: ‎03-20-2009

Re: Remote Control Codes for Home Audio

[ Edited ]

Hello valhalla7,

Welcome to Community@Insignia™!

We'll be happy to look into this concern if you'll please reply with your Insignia receiver model number! Also, the model number of your Kenwood universal remote and/or the product it came with will be necessary for our research.

Regards,
John
Insignia™ Support