Reply
Newbie
Posts: 1
Registered: ‎04-30-2011

Re: Remote Control Codes for Home Audio

Hello. I need a remote code for the NS-R2001 receiver for a Verizon FIOS controller. It's a four digit code. Thanks.

Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Punchblake,

 

Here is a link to the remote codes for your Dish Network remote, the codes for Insignia are 720, 538, 721, 722.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Punchblake,

 

I would like to apologize, after taking a second look at my last post I realized that I posted the wrong information. All I posted were TV codes.

 

I found the correct documentation and I would recommend using the search feature of your remote, to do this follow these steps:

  1. Turn the IS-HC040917 on.
  2. Hold down the Aux button on the Dish Network remote until all the other mode buttons light up, then let go of the Aux button.
  3. Press the number 2 followed by the Star button.
  4. Press Power, then start pressing the Up Arrow. Continue to press the Up Arrow until it turns your home theater unit off.
  5. After the IS-HC040917 turns off then press the Pound button (this will save the code).

 

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Nashuaslick,

 

I would suggest trying the following codes: 0189, 0135, 0842. If those codes do not work the I would suggest running the code scan feature.

  1. Turn on your NS-R2001.
  2. Press the Aux button, then press and hold the Setup button until the Aux button flashes twice. Then release the setup button.
  3. Press 9 9 1 the Aux key will flash twice again.
  4. Aim the remote at the receiver and alternate between pressing Power and Aux, stop once the receiver turns off.
  5. Press the Setup button again to lock the code, and again the Aux button will blink twice.

 

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Pat_don_el_lee,

 

I would suggest using one of the following codes for the NS-R2001:1104, 3632, 3724.

Regards,
Zac
Insignia™ Support
Visitor
Posts: 2
Registered: ‎05-03-2011

Re: Remote Control Codes for Home Audio

I need to know if there is a code that will let me control an Insignia NS-R5100 AV Digital Home Theater Receiver with an Atlas OCAP 5-Device remote control.

Newbie
Posts: 1
Registered: ‎05-05-2011

Re: Remote Control Codes for Home Audio

Hi.......I have the NS-R2001 and need the Remote Code for Cox Digital Cable remote.  Thanks for your help!

Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Ron77777,

 

Here are the codes that should allow you to control the NS-R5100 with the Atlas OCAP 5-Device remote: 1077, 1517, 1653.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello ousooner_85,

 

Try the codes 0491 and 0502. If those do not work then try searching for your code by taking the following steps:

 

  1. Turn on your receiver.
  2. Press the Aux button then hold the Setup button until the Aux button blinks twice.
  3. Press 9 9 1, again Aux will blink twice.
  4. Slowly alternate between pressing Power and Aux, stop when the receiver turns off.
  5. Press Setup to lock the code.
Regards,
Zac
Insignia™ Support
Visitor
Posts: 2
Registered: ‎05-03-2011

Re: Remote Control Codes for Home Audio

Zac

 

Thanks for trying to help but the remote only accepted the 1077 code and none of the functions worked, not even the power function.  I've tried the search feature to no avail.  Any other ideas?

 

Ron