Reply
Newbie
happydude940
Posts: 1
Registered: ‎05-05-2011

Re: Remote Control Codes for Home Audio

Hello,

Is there a code for the IS-HC040917 Recieve to use with the RCN Cable Remote (Synergy V RT-U63CDR-115-2)? Code search does not work.

Thanks.

Insignia Support
John-INSG
Posts: 4,703
Registered: ‎03-20-2009

Re: Remote Control Codes for Home Audio

Hello ron77777,

I apologize for the late reply.  Unfortunately, if you've tried the scan feature and the code provided didn't work, then generally speaking, a more advanced universal remote control is required.  If the remote was supplied by a cable or satellite service provider, they may be able to offer additional assistance.  

Sincerely,
John
Insignia™ Support

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Happydude940,

 

Since you have already ran the code search feature on this remote and it was unable to find a code for the IS-HC040917, this means that the remote is not compatible with the receiver. By using the code search feature you have attempted to use every code that is on that remote for audio receivers. I would suggest running the search again to make sure that it does not detect a code.

Regards,
Zac
Insignia™ Support
kp
Newbie
kp
Posts: 1
Registered: ‎05-13-2011

Comcast "Gray" OK Button

Are there any codes for the Sound Bar using Comcast's remote with the gray OK button?  Thanks

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Comcast "Gray" OK Button

Hello Kp,

 

I would suggest using the code search feature of the Comcast remote by following these steps:

 

  1. Turn on your NS-SBAR.
  2. Press the Aux button, then press and hold the Setup button until it blinks twice. Once it blinks twice release the button.
  3. Press 9 9 1 3, the Aux button will blink twice.
  4. Press the Power button, then aiming the remote at the NS-SBAR, begin pressing the CH+ button repeatedly until the sound bar turns off.
  5. Once the NS-SBAR turns off press Setup to lock the code, and the Aux button will blink twice.
Regards,
Zac
Insignia™ Support
Newbie
dustins4
Posts: 1
Registered: ‎05-25-2011

Remote Codes for Time Warner Cable Remote

Synergy V RT-U64CP to Insignia NS-HTIB51A

thank you

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Codes for Time Warner Cable Remote

Hello Dustins4,

 

I would suggest using the following codes to program your RT-U64CP remote with the NS-HTIB51A:

 

126, 171, 304, 543, 579.

Regards,
Zac
Insignia™ Support
Newbie
rdevine_az
Posts: 2
Registered: ‎06-04-2011

Re: Remote Control Codes for Home Audio

I have an Insignia NS-R2001 AM/Receiver and would like to use a Vizio XRU9M remote.

 

What is the remote code for the audio control device with this remote.

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Rdevine_az,

 

I would suggest trying the following codes: 1066, 0706, 0806, 0858, 0859.

 

If those codes do not work for you then try using the code search feature by following these steps:

  1. Turn on the receiver.
  2. Press the "Audio" button on the remote.
  3. Press and hold the "Set" button until the LED flashes twice.
  4. Press 9 9 1, again the LED will flash twice.
  5. Press and hold the "Power" button until the the receiver turns off. Once it turns off release the"Power" button.
Regards,
Zac
Insignia™ Support
Newbie
rdevine_az
Posts: 2
Registered: ‎06-04-2011

Re: Remote Control Codes for Home Audio

none of the codes worked.

 

I do not get the two blonks after entrering 911.