Reply
Newbie
Posts: 2
Registered: ‎09-04-2010

Base stand and wall mount for model #NS-PDP42

I just had a 42 inch giving to me and I was wondering if someone could tell me how to take off the base stand and what kind of wall mount to buy for this TV.  Any help would be very appreciated.

Highlighted
Insignia Product Specialist
Posts: 1,365
Registered: ‎04-07-2009

Re: Base stand and wall mount for model #NS-PDP42

[ Edited ]

Hello tmckee13,

Welcome to Community@Insignia™!

 

On page 6 of the manual you will find a detailed step by step guide on how to close the stand (it cannot be removed). Once it is closed you will be able to wall mount the TV with a compatible VESA wall mount.

 

Here you will find the link for the manual:

http://www.insigniaproducts.com/cms/documents/NS-PDP42%20UM%20EN_SP_FR.pdf

 

If it was useful, and you liked it, Kudo it!

Thank you,
Gonza
Insignia™ Support Team

Newbie
Posts: 2
Registered: ‎09-04-2010

Re: Base stand and wall mount for model #NS-PDP42

thanks it did help, but one more thing about the wall mount. what is vesa compatable can you explain and what kind should i buy certain brand or anything like that.

 

Thanks

Insignia Support
Posts: 5,108
Registered: ‎03-20-2009

Re: Base stand and wall mount for model #NS-PDP42

Hello tmckee13,

The VESA (Video Electronics Standards Association) defines the physical interfaces and hole patterns as well as cable and power supply location guidelines for LCD flat panel displays.  A local electronics retailer, like Best Buy, should be able to assist you in picking the best wall mount for your TV.

Regards,
John
Insignia™ Support

John
Insignia Support
Newbie
Posts: 2
Registered: ‎10-31-2010

Re: Base stand and wall mount for model #NS-PDP42

[ Edited ]

hey if you look under the stand as it is monted, remove the screws, you may have to pry of a covering that is hiding the screws, I hope you get it off,,,,,,,I need the stand, my new apt do not allow me to punch holes in the wall,,,,please may I have the stand,,,,,,,,Thank you KEN...................I will pay for shipping,,,,,,,,,,,,,,, {edited per Community Guidelines}

Insignia Support
Posts: 5,108
Registered: ‎03-20-2009

Re: Base stand and wall mount for model #NS-PDP42

Hello Ken,

Welcome to Community@Insignia™!

The stand assembly is available for purchase here.

Regards,
John
Insignia™ Support

John
Insignia Support