Reply
Newbie
Posts: 4
Registered: ‎11-27-2009

Re: Programming Insignia's Remote

Apologies,   the afore mentioned link does show a list of other devices and not remote codes.  I will give it a go and report back.
Newbie
Posts: 4
Registered: ‎11-27-2009

Re: Programming Insignia's Remote

Ends up I was 1 for 2...   I was able to find the code for the cable box, but there was not able to find the code for the Memorex DVD / VCR Dual Deck player.

 

Any Insight?

 

Insignia Support
Posts: 5,083
Registered: ‎03-20-2009

Re: Programming Insignia's Remote

Hello Grymshade,

Welcome to Community@Insignia™!

I'll be happy to look into this concern if you'll please reply with your TV model number!  Also, if you would reply with the device(s) you wish to control, that would be helpful.

 

Regards,
John
Insignia™ Support

John
Insignia Support
Visitor
Posts: 2
Registered: ‎06-09-2011

Re: Remote Control Codes

requesting a remote control code

The remote control manufacturer and model number.
sony RM-EZ2

The model number of your TV.
Insignia IS-TV040925

Any additional details about your situation that might help us help you.
have to replace OEM remote which has broken power button

Visitor
Posts: 2
Registered: ‎06-08-2011

Remote control

I bought a Insignia 19" model # NS-19E720A12 REV A. I would like to know if I can use the remote that came with TV to add on to so it will control my Sony VCR (RMT-V402B)? If possible can you give me directions how to do it ? Also I purchased a GE universal remote control 24991 and I tried getting a response from TV and got nothing. I had intentions of going to one remote rather than hold one in each hand. 

Insignia Support
Posts: 5,083
Registered: ‎03-20-2009

Re: Remote control

Hello michaelgthimm,

Welcome to Community@Insignia™!

The Insignia TV does not have a universal remote so you will have to use the GE remote to control the TV. The codes that should work with the TV are 1181, 1180, 1175, 1171, 0103, 0189, 0217, 0135, 0133, 0116, 0167, 1148, 0456, 0029, 0905, 1406, 1407, or 1408.

 

If none of those codes work then I would recommend using the search feature by the following steps:

  1. Turn the TV on.
  2. Press and hold the setup button on the remote until the red indicator light stays on.
  3. Press the TV button.
  4. Press the on/off button until TV turns off (may take up to 300 presses).
  5. Press enter to lock the code.

 

Regards,
John
Insignia™ Support

John
Insignia Support
Visitor
Posts: 2
Registered: ‎06-08-2011

Re: Remote control

Hey John, Thanks for the help everything is working fine. Mike T.

Newbie
Posts: 1
Registered: ‎06-11-2011

Re: Remote Control Codes

We have an old insgnia tv model number IS-TVCA102212 and we currently have pvr boxes hooked up. The remote is an IR universal remote, AT6400 made by motorola i think but could be wrong. If you have the universal codes that would be appreciated. Thank you.

Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes

Hello Stat_Chick,

 

I was unable to find a code for the IS-TV040925 using the RM-EZ2 remote, however you can use the code search feature by following these steps:

 

  1. Turn on the TV.
  2. Press and hold the "Set" button on the remote then press the "Power" button.
  3. Press the "TV' button on the remote.
  4. Press and release the "CH+" button followed by the "Power" button.
  5. Repeat step 4 until the TV turns of, this could take up to 70 tries before the TV turns off.
  6. When the TV turns off press the "Ent" button to save the code.
Regards,
Zac
Insignia™ Support
Newbie
Posts: 1
Registered: ‎06-13-2011

TiVo Remote for Insignia ns-ltdvd32-09

I am trying to use a TIVO remote to operate my Insignia NS-LTDVD32-09 tv. Using the remote code 0091, I am able to control volume, but I cannot change the input selection nor control any DVD functionality. The numbers on the remote are 090906/A1. Is there a remote code that will allow me to control the input and DVD?