Reply
Visitor
Posts: 1
Registered: ‎10-21-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello all, I have an excellent NS-14FCT and would like to control at least the power and volume, with the remote controller that came with my AT&T uVerse system. The set-top receiver is made by Motorola and is labeled as a VIP1200. I have tried the 'search' method with the AT&T remote, but didn't find a code that would power off my Insignia NS-14FCT. I absolutely love this TV/DVD combo and would love to be able to use the uVerse controller to power it on/off. Thank you for any assistance or advise you may be able to provide.
Insignia Support
Posts: 5,059
Registered: ‎03-20-2009

Re: Insignia TV Remote Control Codes – Official Thread

Hello Eboni,

Welcome to Community@Insignia™!

For DirecTV, please try codes 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002. You may also use your universal remote's scan or learning feature to find a working code. If the don't work for you please reply with your TV model number and the brand and model of your universal remote control and we'll be happy to look into your request.  

Regards,
John
Insignia™ Support

Newbie
Posts: 2
Registered: ‎10-20-2011

Re: Insignia TV Remote Control Codes – Official Thread

Good morning, I have tried all those number and they dont work. My tv model number is NS-32E740A12. And I have the cream color remote from direct tv not sure if this is the model number 2982C1-0 co82601 those are the number that are in the inside of the remote but in the front its RC64 Its has the orange select button in the middle red dot green dot yelow dot and then blue. If that helps. Thanks

Newbie
Posts: 1
Registered: ‎10-21-2011

Re: Insignia TV Remote Control Codes – Official Thread

I have Insignia NS-42L780A12 and would like for the remote control that is with my cable provider, which is Cable One.It is a Motorola DVR DCT6412 III and the remote is Cable One 1059B01.  The quick set-ip on the back of the remote says to use 9-9-1, and I have followed the directions but still not successful. Please help.

Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Yazzara,

 

Unfortunately, after looking through the manual for the RCA remote it seems that the support for TV/DVD combo units is not very extensive. However, a replacement remote for the NS-LTDVD19 can be purchased here.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Eboni,

 

I would suggest trying the following codes:

 

11564, 11641, 11326, 12002, 11204, 11423, 11517, 10171, 10463, 11963, 10842, 11603, 11463.

 

If none of these codes allow you to control your TV with the DirecTV remote, I would then suggest that you use their code search feature named "StepNSet". The directions to use the code search feature are as follows:

 

StepNSet

1. Set the "Mode Switch" to the desired mode such as TV for a Television.

2. Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.

3. Enter the code "991" followed by the "device number"

          1 for Televisions

          2 for "AUX 1" devices - VCRs or DVDs

          3 for "AUX 2" devices - Audio

4. You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.

5. You can try out each code by pressing one or more function keys such as power, volume or digit keys.

6. When you've found the setup code that works for your device, press the "Select" key.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Willieboy,

 

Unfortunately, if you have used the code search feature and found no codes that would allow your remote to control your TV, then the two products are not compatible. This is due the fact the the code search tries every code in its database against the TV, so if there is a code that will work, the TV will respond. I apologize for the inconvenience.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: NS-F27TV, remote code so my older sony dvd player can acess it?

Hello Shedivy,

 

Unfortunately I was unable to locate a code to allow you to control the NS-F27TV with the Sony remote. However, it appears that the TV remote codes are 01-19, as a result you could manually try the codes in that range, but it is likely that the two units are not compatible. In regards to the manual for your TV, it can be found here.

Regards,
Zac
Insignia™ Support
CJ
Visitor
Posts: 1
Registered: ‎10-21-2011

Re: Insignia TV Remote Control Codes – Official Thread

I Have a Insignia  24" 1080 60htz

and I have verizon fios box

 and Verizon 0198, 0490 codes do not work with my verizon remote. he remote model for verizon is FIOS TV REMOTE CONTROL MOD# P265v1:2-DEVICE UNIVER

 CJ

Insignia Product Specialist
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello RuthRice,

 

Unfortunately I was unable to locate any programming information for the Cable One 1059B01. I would recommend contacting Cable One directly, they should be able to either give you programming instructions for an Insignia TV or be able to assist you with using the code search feature which should find a compatible code for your TV.

Regards,
Zac
Insignia™ Support