Reply
Newbie
Dlpeterson
Posts: 1
Registered: ‎11-13-2011

Re: Insignia TV Remote Control Codes – Official Thread

24e730a12 with unversed service, have silver AT&T remote, none of the codes you list work, please advise
Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Hlmy14,

 

I was unable to locate a specific code for your TV and remote, however here are the directions provided by Bell for using the code search feature of your remote:

 

  1. Make sure the TV is on.
  2. Press and hold the TV button on the remote until the SAT, TV and VCR buttons light up.
  3. Let go of the TV button. The TV button should start to flash.
  4. Press the Power button on the remote control. The TV button will stay lit.
  5. Press the up arrow on the remote every second until the TV turns off.
  6. When the TV turns off, press the # button on the remote to lock the code. If the scan was successful, the TV light will flash 3 times.

If a code is available that will allow the remote to control the TV, the code search feature will find it, otherwise the two devices are not compatible.

Regards,
Zac
Insignia™ Support
Newbie
dbled1106
Posts: 1
Registered: ‎11-13-2011

Re: Insignia TV Remote Control Codes – Official Thread

I have Knology Cable remote: 1056B03

TV: NS-55E790A12

 

Looking for codes please.

Insignia Support
John-INSG
Posts: 4,703
Registered: ‎03-20-2009

Re: Insignia TV Remote Control Codes – Official Thread

Hello stevesal32,

Welcome to Community@Insignia™!

You can find remote control programming instructions and codes in the User Manual beginning on page 63.

Regards,
John
Insignia™ Support

Insignia Support
John-INSG
Posts: 4,703
Registered: ‎03-20-2009

Re: Programming a DISH remote

[ Edited ]

Hello Snarkage,

Welcome to Community@Insignia™!

Unfortunately, your Insignia TV User Manual will not provide instructions for programming a third-party remote control. I recommend that you consult your Dish remote control owner's manual for instructions or call Dish Network directly for assitance in programming their remote control.

 

If you still need help afterward, please feel free to reply here with your TV model number and the brand and model of the universal remote control you wish to program.

Regards,
John
Insignia™ Support

Insignia Support
John-INSG
Posts: 4,703
Registered: ‎03-20-2009

Re: Programming device codes into a NS-RC01G-09 remote

Hello foodper,

Welcome to Community@Insignia™!

We'll be happy to look into this concern if you'll please reply with your TV model number!

Regards,
John
Insignia™ Support

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Bwashburn,

 

Unfortunately you are unable to reprogram the buttons on the remote to allow you to change to VGA input. The only way to switch to VGA is by pressing "Input" then selecting it from the list. I apologize for the inconvenience this may cause you.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Dlpeterson,

 

I would suggest that you use the code search feature of the remote. Instructions on how to use this feature can be found on page two of the manual, located here.

Regards,
Zac
Insignia™ Support
Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello dbled1106,

 

I would suggest trying the following codes: 1326, 1423, 2002, 1204, 1517, 0171, 0463, 1963, 0842.

 

If none of the codes allow you control of the TV with your remote, I would suggest using the code search feature by following these steps:

 

  1. Turn on your TV.
  2. Press the "TV" button on the remote, then press and hold the "Setup" button until the TV button blinks twice.
  3. Press 9 9 1 and the TV button will blink twice again.
  4. Aim the remote at the TV and press the "Power" button.
  5. Repeatedly press the "CH+" button until the TV turns off.
  6. Press the "Setup" button to save the code.
Regards,
Zac
Insignia™ Support
Visitor
foodper
Posts: 2
Registered: ‎11-12-2011

Re: Programming device codes into a NS-RC01G-09 remote

JOhn,

 

I found the answer in an Insignia TV manual.  Seems to me though, that by giving you the remote model number, you should have been able to provide general directions.  Turns out, it was like programming a Comcast remote, except I needed to find the TV / Cable box codes, which I also found in the TV manual I downloaded - it had a picture of the NS-RC01G-09 remote.  So I got the answer, after a bit of GOOGLE time.

 

So I am done.