Reply
Visitor
mikemeehan7
Posts: 3
Registered: ‎07-08-2011

Re: Insignia TV Remote Control Codes – Official Thread

I have Insignia model NS 55E560A11 REV A and am using Direct TV remote RC65RX.

I have tried the codes listed on the Direct TV website and the auto search feature.

I can only control the TV sound.  The TV will not start or shut off with the Direct TV remote.

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Mikmeehan7,

 

If you have tried all of the codes listed on Directv's website and you are still not able to use the remote properly I would suggest using the remote's code search feature. The feature on Directv's remotes is called "StepNSet" and here is the process as provided on their website:

 

  1. Set the "Mode Switch" to the desired mode such as TV for a Television.
  2. Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
  3. Enter the code "991" followed by the "device number"
  • 1 for Televisions
  • 2 for "AUX 1" devices - VCRs or DVDs
  • 3 for "AUX 2" devices - Audio

4. You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.

5. You can try out each code by pressing one or more function keys such as power, volume or digit keys.

6. When you've found the setup code that works for your device, press the "Select" key.

Regards,
Zac
Insignia™ Support
Visitor
mikemeehan7
Posts: 3
Registered: ‎07-08-2011

Re: Insignia TV Remote Control Codes – Official Thread

Thanks for the info.  I think I failed to move the switch to TV when programming it before.  The Direct remote is now turning the TV on and off.

Newbie
Wlahners
Posts: 1
Registered: ‎07-13-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hi I have a SN-20CLTV (20in TV/DVD) and I need the IR code to run my Comcast digital transport adapter remote (I just need the TV functions). Thank you
Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello Wlahners,

 

I would suggest using the code search feature of this remote. This can be done by following these steps:

 

  1. Turn on your TV.
  2. Press and hold the "Set" button on the remote until the LED blinks twice, then release.
  3. Enter 9 9 1.
  4. Begin pressing the "CH +" button until the TV turns off, this could take several presses.
  5. Press the "Set" button to lock the code.

 

 

Regards,
Zac
Insignia™ Support
Newbie
jstasney
Posts: 2
Registered: ‎07-16-2011

IS-TV040922A Remote Code for Comcast Custom DVR 3 Device Remote

Hi, 

I have a 2006 Insignia model IS-TV040922A  24" TV and recently was sent a Comcast Custom DVR 3-Device Universal Remote control to operate it and my new cable control box.

 

The Insignia Programming Control codes listed with the Comcast remote fail to power off the TV.

 

A search of available codes with the Comcast Remote also fail to power off the TV.

 

The OEM Insignia Remote has an ID. Tag inside the battery compartment

with the following number printed on it: BT-04148...CH

 

Maybe this number will assist Insignia support in locating a remote control code for this device

that is compatible with the Comcast remote described.

 

Thanks

 

JLS

 

PS..

To the moderators...

There needs to be a editing option for user posts as my last post had typo errors

in the subject and body of the post I wished to correct but was unable to.

Also a delete option would be nice, as well.

:smileywink:

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: IS-TV040922A Remote Code for Comcast Custom DVR 3 Device Remote

Hello Jstasney,

 

Unfortunately if you have already preformed the code search feature of the remote and you are still unable to operate the TV, then the Comcast remote is not compatible with the TV. I apologize for the inconvenience.

Regards,
Zac
Insignia™ Support
Newbie
venka_arun
Posts: 1
Registered: ‎07-20-2011

remote control code for my TV

Hi I want to know the code for my TV (model NS-20FTV) to program my ATT-Uverse remote.

 

thanks

venkat

 

Insignia Product Specialist
Zac-INSG
Posts: 1,684
Registered: ‎03-22-2011

Re: remote control code for my TV

Hello Venka_arun,

 

The U-Verse code for Insignia televisions is 1507.

Regards,
Zac
Insignia™ Support
Newbie
fred06
Posts: 1
Registered: ‎07-25-2011

Re: Insignia TV Remote Control Codes – Official Thread

Hello John,

 

I want to know the code to CONTROL the DVD on my TV/DVD combo (NS-LDVD19Q).

Remote control: URC-4220  (one for all)

 

Thanks for your support.

 

Fred